Commodity Traders International - Clipper 29D 298D Seed Cleaner

Your Seed Cleaning, Grain Handling, Feed Milling, Recycle Processing Equipment Specialists!

The Clipper Super 29D / 298D Cleaners

All-Purpose 4 Screen Cleaners

These seed cleaners are adaptable to cleaning a variety of seeds, such as
corn, soybeans, wheat, rye, grass seeds, wildflower and native grass seeds.
Click here for downloadable literature about the 29D/ 298D.
Click here for screen inventory for the 29D cleaner.
Click here for screen inventory for the 298D cleaner.

The Clipper 29D and 298D share some outstanding features, some of which are:

Two large Top Suction Fans
Famous Clipper Bottom Blast Fan
Variable Shoe Shake
Adjustable Pitch Screens
Variable Air Regulator
Double Traveling Screen Brushes or Ball Trays under each screen
Over 200 different screen perforations and meshes available

Model 29D or 298D

Some specifics:
Size: 141.5" L x 76" W x 96" H
                            88" W for 298D
Horsepower: 7.5 hsp and 10 hsp
Shipping Weight: 3350 lbs and 3800 lbs
Capacity: 60 - 300 bu. per hr.
Screen size: 42" x 60"
                    54" x 60" for 298D
Drive Shaft Speed:  900 rpm

The flow of commodity (seed or grain) through the Clipper 29D / 298D cleaner is as follows:

Hopper - a special, slowly revolving, fluted roll to force-feed the commodity into the hopper air passage for the first air separation. Gives even distribution across the width of the screen.
Right suction fan adjusted by Adjustment A control removes light trash to the dust house; the heavier trash discharges at Spout G.
Spout A discharges top screen scalpings. Quick change-over can also be made at this point to convert one finishing screen to a third scalper.
Discharge thru the bottom screen in the top shoe can be directed out of Spout B or joined with discharge of final separation out of Spout D as desired.

Scalpings from the top screen in the lower shoe are discharged from Spout C.
Immature seed, splits, dirt, smaller weed seed, etc., that drop through the fourth or finishing screen are discharged from Spout D.
The final air separation occurs after the finishing screen has done its work. At this time the variable air adjustment is made at Adjustment C synchronized with left top suction Adjustment B.
Heavier material drops into Spout E, and lighter material not carried out to the dust house drops into settling chamber discharge at Spout F.

The Clipper 29D / 298D comes with 1 set of screens of your choice. Additional screens can also be purchased.

In our shop, we at CTI completely refurbish the Clipper cleaners and make them like new. All Clipper Seed Cleaners are sent out with an information booklet to help you in your seed cleaning operation.

If this machine can help you, call or email us! We always have a collection of Clipper Seed Cleaners on hand and ready to prepare just for you. If you own a Clipper cleaner that you would like for us to rebuild, call today!